GPS Emlid Reach RS2+ RTK GPS or Rover and Base Station
streaming in NMEA
Reach provides data in standard NMEA that is used by most survey and GIS apps. Simply connect your device to Reach over Bluetooth or with a cable, and turn on “Position output” in Emlid Flow.
Reach can turn on and off automatically
Reach is able to turn on and off in sync with an external battery connected over RS-232. This helps when the power button is hard to reach. For example, if the receiver is placed on the roof of a tractor.
FieldGenius for Android, ESRI Collector, QField and others
RS-232, TCP, Bluetooth
NTRIP or another Reach
as a base station
Reach RS2+ needs a base station as a source of corrections. That’s a requirement for centimeter precision in RTK and PPK. Base might be either another Reach RS2+ receiver or an NTRIP service. VRS is also supported.
Reach RS2+ works seamlessly with other Reach receivers over any link.
Input and output corrections
TCP, LoRa, Bluetooth, RS-232, NTRIP
Max distance from a base:
Over 60 km in RTK
100 km in PPK
Any place on Earth with PPP
*(Does not include shipping or insurance)