Electromagnetic Geonics EM-34 XL

#101120

Included Accessories: Transmitter, Receiver, (2) coils, (3) cables - 10m,20m,40m

The EM34-3 is a fast, simple to operate, cost-effective instrument for the engineering geophysicist, geologist and hydrogeologist alike and has been particularly successful for mapping deeper groundwater contaminant plumes and for groundwater exploration.

Using the same patented inductive method as the EM31, the EM34-3 uses 3 intercoil spacings to give variable depths of exploration down to 60 meters. The EM-34 XL was developed to provide greater signal detection ability at the longer spacings. The XL employs a larger coil ~1.0m in diameter and it weighs about 1.5kg more than the standard coil.

In regions of particularly high cultural and atmospheric noise the higher powered EM34-3XL improves the signal to noise ratio by a factor of 10 at the 40 m spacing and by 4 at the 10 m and 20 m spacing.


SPECIFICATIONS
   
MEASURED QUANTITIES
  Apparent conductivity in millisiemens per metre (mS/m)
   
PRIMARY FIELD SOURCE
  Self-contained dipole transmitter
   
SENSOR
  Self-contained dipole receiver
   
REFERENCE CABLE
  Lightweight, 2 wire shielded cable
   
INTERCOIL SPACINGS &
OPERATING FREQUENCY
  10 m at 6.4 kHz
20 m at 1.6 kHz
40 m at 0.4 kHz
   
POWER SUPPLY
  Transmitter: 8 disposable or rechargeable “D” cells
  Receiver: 8 disposable or rechargeable “C” cells
   
CONDUCTIVITY RANGES
  Conductivity: 10, 100, 1k mS/m
   
MEASUREMENT RESOLUTION
  +/- 0.1% of full scale
   
MEASUREMENT ACCURACY
  +/- 5% at 20 mS/m
   
NOISE LEVELS
  Conductivity: 0.2 mS/m (can be greater in regions of high power line interference)
   
DIMENSIONS
  Rx Console: 19x13.5x26 cm
Tx Console: 15.5x8x26 cm
Rx & Tx Coil: 63 cm diameter
EM34-3XL Tx Coil: 100 cm
Case: 27.5x75x75 cm
   
WEIGHTS
  Instrument: 20.5 kg; XL: 26.5 kg
  Shipping: 43 kg; XL: 51 kg

 

Dimensions

42 X 42 X 8 inches

Weight

88 lbs

Price

$21,000.00

Purchase

Ask a question about this item

*(Does not include shipping or insurance)